HV6130 and HV6130H: A concentrate of power and technology in a small package !

MKS is releasing 2 new servos for the glider enthusiasts we are, the HV6130 and HV6130H (upright mounting tab for fuselage use) ! They use the same form factor than the DS6100 / HV6100 / HV6110 but use all metal case, and feature an upside-down high quality HV coreless motor installing, to reduce space. This servos will therefore easily fit in the smallest wing servo bay, used with RDS or LDS, or fuselage, and provide an incredible torque between 6kg under 6V to 8.1kg under 8.2V !!!

They are positionned between the 6125 and 6625 family, but are smaller than both. You will find the spec drawing below. They integrate 2 new interresting features with in addition to 3 ball bearings, 2 additional jewel bearings to strengthen the structure, and a Built-in Safe

System, which works as a protection against voltage draw when servo overloading and allow to land the plane safely.

Please note that the HV6130 will be available within 1 or 2 months, and HV6130H will come a bit later.

HV6130

• Torque: 6.0 kg-cm(6.0V) / 7.6 kg-cm(7.4V) / 8.1 kg-cm (8.2V)
• Speed: 0.14 s (6.0V) / 0.11 s (7.4V) / 0.10 s (8.2V)
• Weight: 22.5 g
• Dimension：30 x 10 x 29.8 mm 
• Working Voltage：3.5~8.4 V DC Volt
• Working frequency：1520μs / 333Hz
• Current draw: 1.2A @ 6.0V 1.4A @ 7.4V 1.6A @ 8.2V
• Dead Band：0.001 ms (Default)
• Bearing : 3* ball bearing + 2*Jewel bearing
• Motor：Coreless Motor
• Gear：Metal alloy gear

HV6130H

• Torque: 6.0 kg-cm (6.0V) / 7.6 kg-cm(7.4V) / 8.1 kg-cm (8.2V)
• Speed: 0.14 s (6.0V) / 0.11 s (7.4V) / 0.10 s (8.2V)
• Weight: 23 g
• Dimension：30 x 10 x 29.8 mm 
• Working Voltage：3.5~8.4 V DC Volt
• Working frequency：1520μs / 333Hz
• Current draw: 1.2A @ 6.0V 1.4A @ 7.4V 1.6A @ 8.2V
• Dead Band：0.001 ms (Default)
• Bearing : 3* ball bearing + 2*Jewel bearing
• Motor：Coreless Motor
• Gear：Metal alloy gear