For the equipement, I will use a 4 x eneloop 800mAh cells battery, an Assan 2.4Ghz 6-channels small receiver, and 2 hitec HS82mg servos that fit perfectly in the servo compartiment molded. Stay tuned !
Sunday, November 6, 2011
Weasel Black Edition
I started the building of my Weasel Black Edition. This time I didn't papersand picos on the surface to keep it shiny. I used again vinyl for the ailerons. The rest of the assembly should'nt be too long as the most difficult is now done.
For the equipement, I will use a 4 x eneloop 800mAh cells battery, an Assan 2.4Ghz 6-channels small receiver, and 2 hitec HS82mg servos that fit perfectly in the servo compartiment molded. Stay tuned !
For the equipement, I will use a 4 x eneloop 800mAh cells battery, an Assan 2.4Ghz 6-channels small receiver, and 2 hitec HS82mg servos that fit perfectly in the servo compartiment molded. Stay tuned !
Subscribe to:
Post Comments (Atom)
Building My FALCO – A Lightweight Setup
Author: Eric Collard Intro Following Pierre’s advice, I went for a Falco that I plan to use mainly for mountain flying and...
-
More information here A thumbs version will be available in september 2011 : DC-16 main features: HARDWARE: - Magnesium body - 3,... -
by Yannick Selles and Pierre Rondel Introduction The purpose of this article is to propose you to "build" your own Blu... -
In fact we cannot really talk about assembly as it takes 25 minutes to have it ready, no glue is needed. This is faster than some RTF ki...
This comment has been removed by a blog administrator.
ReplyDelete