Successful first attempt at molding a centering lead for the Odin using the silicone mold technique.
First step: create a master of the inner nose using 3D printing, either by iteration if you don't have access to the CAD file, or using the file provided by the manufacturer.
Prepare the container for the mold; in my case, a cardboard cup. Position the master on top of the cup; I used a flat stick. Next, prepare the silicone mixture (heat-resistant type) in a 1:1 ratio, mix it well, and then pour it around the master. Add some weight on top of the master, as it tends to float otherwise.
Wait overnight or longer, and then you can proceed to mold the lead.
The result is convincing.
