facebook js

Follow Planet-Soaring on Facebook

Wednesday, June 29, 2011

MKS DS 6125-E

I received the brand new MKS servos, called DS6125-E. This servos is a improved version of the DS95. It has the same servo case, in aluminium, and therefore the same dimensions.



The electronics and gear train is different to give a better torque and improved speed.Also the dead band is better. The servo dead band is measured in microseconds, and is an indicator of the "electrical slop" of the servo's electronics. To simplify, it measures the resolution of the servo.

The DS6125-E and the DS 6125-H together
This means for us a more precise servos, which is always a good thing. I installed in my Vampire F3F 2 x DS95, and flew it during the beginning of the season. My feedbacks are excellent. The servos is so fast and precise that it follows the radio stick oscillation.

See my posts and video here.

http://planet-soaring.blogspot.com/2011/02/mks-ds95-servos-arrived.html

and here

http://planet-soaring.blogspot.com/2011/02/vampire-assembly-started.html

What I also like in the DS95, so the new DS6125-E servos is their dimensions. F3X sailplane fuselage are usually very thin, making the radio installation sometimes tricky. Using these servos made me to save place on the servo tray and have more space for the receiver and the batterie. I appreciated it on the Vampire for example.


Below is the comparison table between the DS95 and the DS6125-E

4 comments:

  1. Bonjour Pierre
    Ces petits servos m'intéressent pour remplacer des Hitec 65Mg dans un avion 3D classe 48" (Extreme Flight) et faire ainsi une config très performante. On peut trouver le DS95 à 56€ chez fast-lad. Ça va encore :/
    Seulement, j'ai lu sur Rcgroups que les pignons du palonnier sont spécifiques MKS. Et j'aurais besoin d'utiliser de longs palonniers pour la 3D. Est-ce que vous confirmez, ou on peut en fait utiliser du Futaba/Hitec/JR ?
    Merci

    ReplyDelete
  2. Bonjour,

    oui, la sortie de palonnier est spécifique MKS. Je sais que MKS travaille sur la fabrication de long palonniers. je ne sais pas ou cela en est.

    Pierre

    ReplyDelete
  3. Replies
    1. Bonjour, en attendant que MKS....; Voici ce qu'il est possible de faire.

      1)Préparation https://picasaweb.google.com/lh/photo/s3vWAhuex3S12hrfnzFU6HKwX6AumnZNnQJBWyahheI?feat=directlink

      2)Mise en place https://picasaweb.google.com/lh/photo/kUUuVOe3-zVdaMVbPpamCHKwX6AumnZNnQJBWyahheI?feat=directlink

      3)Brasure https://picasaweb.google.com/lh/photo/9PUGmVWYSqwrZDObK95hDnKwX6AumnZNnQJBWyahheI?feat=directlink

      On ne recule devant rien

      Laurans.P

      Un planeuriste admiratif

      Delete

Jehnedi (CZ) F3G Eurotour final contest report

Text and photos:  Sebastian Haase (German version below) In my last and first report on the new, young and upcoming FAI class F3G, Pierre an...