facebook js

Follow Planet-Soaring on Facebook

Wednesday, February 6, 2019

New version of the RC throwmeter App available


In this version, Yannick changed a bit the main screen, by limiting the display to one digit after the decimal point instead of two. This is more confortable for the reading as the last digit was always changing and because we don't need this level of precision.

He also added the planet-soaring article on the start page as an embeded user manual.

This new version can be downloaded here:

https://www.dropbox.com/s/2maiq7huw77kkt1/RC_Throwmeter_06022019.apk?dl=0

To answer some questions I received: There is no possibility yet to connect 2 devices to the same App as the BLE connection is point to point, unlike Wifi. A simple solution consists in using a second smartphone.

It seems the App cannot be installed on Android 4.4.4 (Kit Kat), but I don't think we will troubleshoot why as this version of Android is more than 5 years old now.

I will try to pair an iOS smarphone with the device, but the manufacturer says his device is not compatible with iOS. In case it work, which I don't think, I will update you.




Saturday, February 2, 2019

Make your own BlueTooth RC Throwmeter !


by Yannick Selles and Pierre Rondel

Introduction

The purpose of this article is to propose you to "build" your own Bluetooth throw-meter for a very reasonable cost. It doesn't require any soldering or cabling. You just need to have access to a 3D printer and that is all !

The original idea came to Pierre's mind after finding by chance on aliExpress an all-in-one 6 Axis Bluetooth Digital Angle Accelerometer Module.

Initially, he bought 2 exemplars of the board, then bought a 1s lipo, a micro switch, and designed the case and the clips. Later he discovered that the same component existed with a case the battery, the switch, the charging plug, and a charging cable for 4 euros more. It saves a lots of soldering and cabling, so the final version we propose hereafter is based on this model.

The component

The component is the BWT61CL  from Wit Motion, a Six axis Bluetooth attitude angle sensor with battery incorporated. It can by bought on aliexpress or amazon US and cost around 20 Euros, free shipping.

It is based on the JY61 sensor, has Bluetooth or serial connectivity, integrates a dynamic Kalman filter algorithm, an internal voltage stabilizing circuit module, voltage 3.3v~5v. The only drawback it has is that the Bluetooth BLE is only compatible with android. The battery has  a 150mA capacity so last for a long operation time.

Where to buy

Characteristics

  •     Voltage: 3.3V-5V
  •     Current: <40ma li="">
  •     Size : 51.3mm x 36mm X 15mm
  •     Weight : 16gr
  •     Dimension: Accelerated speed -3d Angular speed -3d Magnetic field-3d Angle-3d
  •     Air pressure 1d
  •     Range : Accelerated speed -±16g Angular speed -±2000°/s Angle---±180°
  •     Stability: Accelerated speed -0.01g Angular speed -0.05°/s
  •     Attitude measurement stability: 0.05°
  •     Output content: Time, Accelerated speed, Angular speed, Angel.
  •     Output frequency:100Hz
  •     Date interface: Serial TTL level Bate rate--115200(default and cant be changed)
  •     Bluetooth transmission distance : >10m
  •     Support for Android
  •     Working time: 2 to 3 hours (full charge)

Documentation  

Building your RC Throw-meter

As I said in introduction, the work is limited to the 3D printing of the clips that allow to fix the device on the trailing edge of the glider. It has been designed on DesignSpark (original file .rsdoc), and I'm providing the .rsdoc original file in addition to the STL file.

The clips is removable so the device, its clips and the charging cable can be carried/stored in the plastic box it was received in.

Just print the part, in PLA or PETG or ABS, 100% in fill for me. The dimension is optimised for F3x plane wings and tailplanes. To protect the surface of the control surface and avoid the clips to slide/shift, I added a piece of rubber (a small piece of bicycle inner tube) on the clips surfaces, with double side tape.



Print the sticker using the .pdf provided. Prior to apply it, don't forget to remove the other sticker. Protect the printed paper with transparent tape at the top, and double side tape on the other side, and position it on the top of the case, respecting the correct orientation (Charge, On/Off). This will give you the orientation when using it, pointing where is the hinge.


The App

The Android App has been developed by Yannick. The Mobile Application can be downloaded on  GOOGLE PLAY

The App is divided in several screens, the start screen giving access to the top left menu, the "Sensor BT" screen to bind the App with the throwmeter, and finally the "Throw Meter" screen where everything happens once binded.

Using your RC Throw-meter

Charging the battery 

Connect the cable provided to the balancer Plug. The red led is ON during the charge and switch off once charged

Switching on your Throwmeter

Move the sliding switch from right to left. The blue led is blinking which indicates that the device is waiting for the binding.

Pairing your Android smartphone for the first time

On in the parameter/bluetooth menu and scan for new device. The RC throwmeter will show as HC-06. When asked, enter the code 1234. The throwmeter is now paired, you can open the App.

Binding with the App

Select the menu on the top left, then open "Sensor BT" and select HC-06 or click on SCAN if the device doesn't appear. Once selected you can return on the start page, Open the menu on the top left and select "Throw meter"

Very first calibration

If the device is providing inconsistent or weird measures, it probably needs a full calibration using the manufacturer App you can download here.  To do so, once selected the correct chipset model, click on SET (top left) and then "Acceleration calibration".



Reset Angle 

The device is supposed to do a calibration at startup. It is recommended to do it with the device installed on a horizontal surface. Once done, you can clip the device on the leading edge of control surface you want to measure. When your control surface is at its neutral position, proceed to a  new "Reset Angle" in order for the device to know its spacial position and be ready to measure the angle.


Travel setup 

Measure the chord of you control surface and click on the chord field at the top of the screen to enter the value. There is no unit so it can be mm or inches. Travel will be shown in the same unit.

Max UP and Max DOWN

This is a very useful feature that allow you to quickly measure the Max UP and DOWN travels of a control surface.



SET Max UP and Max DOWN

If your objective is to do the settings, not to measure, you can enter the Max UP and Down value separately to indicate to the App to display an alarm (Red color) when the max value is exceeded.


When the travel value exceed the max Value set, the corresponding line is going RED, but will continue to record the max value, even if it is above the limite. So you need to reset time to time to erase the max travel recorded and check your setting.



Hope you will enjoy this Bluetooth RC Throwmeter ! We will probably release new versions in the futur, but be patient.

F3G and F3B in Kulmbach / Germany, a tradition continues!

From May 10th to May 12th, 2024, the Kulmbach model aircraft association organized a combined competition on its own model aircraft site nea...