Tuesday, March 26, 2013
Pike Precision electro fuselage
I recently received from Samba Mmodel my Pike Precision electro fuselage. Below are some pictures of it. the fuselage arrives with the servos tray ready to mount, servos being upside down in this configuration. elevator snakes are in place. A small pocket with accessories such as the wing connector (green MPX connectors) and wires, ball clevises. the fuselage is shorter thant the glider version, present the same inner section, that is to say it is very tight. The motor must be as inrunner, with gear train. Several combination of motor/propeller/ESC are possible. On my side, I will reused my Kontronik Kira 480-43.
For further information you can contact Samba Model. I will start the assembly soon and will post the progress here.
Subscribe to:
Post Comments (Atom)
F3G and F3B in Kulmbach / Germany, a tradition continues!
From May 10th to May 12th, 2024, the Kulmbach model aircraft association organized a combined competition on its own model aircraft site nea...
-
More information here A thumbs version will be available in september 2011 : DC-16 main features: HARDWARE: - Magnesium body - 3,... -
by Yannick Selles and Pierre Rondel Introduction The purpose of this article is to propose you to "build" your own Blu... -
In fact we cannot really talk about assembly as it takes 25 minutes to have it ready, no glue is needed. This is faster than some RTF ki...
No comments:
Post a Comment