Follow Planet-Soaring on Facebook
Saturday, January 27, 2018
A removable servo tray for thin F3x electro fuselages
Some information about my removable servo tray for the Shinto electro.
It is composed of 2 parts because of the 3D printing constraints. The lower part is just to provide a rounded support to fit perfectly with the fuselage. The upper part allows to mount 2 servos MKS6100/HV6100/HV6110 in a oblique position, upside down, in order to have a free movement of the control rods.
The 2 plate are glued together with some cyano, then fixed into the fuselage with 3 mm screws. On my Shinto, it will be located just in front of the wing joiner. Of course, it means that you abandon the elevator control snakes and sleeves, and replace them with carbon rods and the corresponding MPjet aluminium Threated adapter, so you can easily mount and remove the servo tray when needed.
I will share the CAD drawings and STL files soon.
PS: I like DesignSpark very much !!!!! :)
I had the chance to visit FLASH RC ( www.flashrc.com ) last week and participate to the unboxing of the Alpina Carbotec (Electro version) wi...
by Yannick Selles and Pierre Rondel Introduction The purpose of this article is to propose you to "build" your own Blu...
Deux ans après la sortie du populaire et réussi Solius, Multiplex récidive avec une nouveauté présentée à Nuremberg, dans la parfaite...
(version française à la fin) Hello everyone, Following the closure of the RC-Slopes site and so that the exceptional contribution o...